Customized 200T blue vulcanizing machine to produce silicone fresh cover stroke 250

Vulcanizing machine daily inspection and maintenance

A. routine inspection and maintenance

1) check whether the photoelectric mold closing device is sensitive and reliable;

2) check the part of the electric heating board to see whether the fixing of the electric heating board is

firm and whether the wiring is short circuit;

3) check whether there is oil leakage in motor oil pump, piping and valve;

4) check the height of fuel tank level;

5) check the flow of cooling water;
6) check for abnormal sounds in motor oil pump, piping, valve, etc.;
7) the machine up and running, hours after the oil temperature should be generally within 35 ° C ~ 50 ° C;
8) check whether the system pressure is normal.
B. weekly inspection and maintenance
1) if the solenoid valve is heated, check its vibration and wiring;
2) whether the fastening screw of limit switch is loose;
3) whether the pipe joint is loose;
4) whether the filter is blocked.
C. Check and maintain monthly
1) check the oil pollution of the work;
2) cleaning inside and outside the machine;
3) check screw and barrel.
D. annual inspection and maintenance
1) whether the circuit wiring is loose;
2) setting state of limit switch;
3) check the wear condition of the mechanical part, whether the fixed screw is loose, and tighten it.

Automatic plate vulcanization molding machine

rubber vulcanizing equipment

silicone injection molding machine

Customized 200T blue vulcanizing machine to produce silicone fresh cover stroke 250 Images